DELIVERS CLINICAL ULTRASOUND THERAPY AND ELECTROTHERAPY!

The microprocessor controlled COMBO CARE is a professional two-channel electrotherapy device that combines clinical ultrasound therapy with five treatment waveforms: IF 4-Pole, IF 2-Pole, Russian, EMS and TENS waveform.

The large easy-to-read LCD panel allows the user to quickly set up treatment programs and settings. A dual frequency 5 cm2 clinical sound head comes standard with the unit. The COMBO CARE has a portable design allowing you to use at home, office, or travel.

The COMBO CARE is simple and easy to use. This unit comes with EVERYTHING NEEDED for IMMEDIATE USE.


What is Included?

• (4) 50 x 50 mm Adhesive Electrodes
• (4) 50 x100 mm Adhesive Electrodes
• (2) Sets of Rubber Electrodes with Sponges
• (2) Elastic Straps
• (2) sets of lead wires
• (1) AC adapter and Power Cord
• (1) Electrical Stimulation Cable
• (1) Electrode Wire for Ultrasound Combination
• (1) 5 cm2 Ultrasound Head,
• (1) Ultrasound Transmission Gel
• (1) Operating manual

Product Features:

• Two channels of electrical stimulation output
• Large easy-to-read graphical LCD display with exact dial performance and programmable timer
• Waveforms include: IF 4-Pole, IF 2-Pole, Russian, EMS and TENS waveform
• 10 presets per waveform totaling 50 presets in all
• 20 ultrasound presets
• User-defined memory positions for user protocols
• Designed for tabletop, therapy cart or mobile use
• Product dimensions: 9.8"(W) x 7.3 (L) x 3.2 (H)
• Product weight: 5.5 lbs
• 2-year warranty

Technical Specification

GENERAL SPECIFICATIONS Adaper Supply Voltage: 100-240 VAC, 47-63 Hz, 1.35A Adapter Output: 15V - 3A Max. Adapter Dimensions: 143mm (L) x 73mm (W) x 40mm (H) Dimensions: 250mm (L) x 185mm (W) x 82 mm (H) Operating Environment: Temperature: 10°C (50°F) to 40°C (104°F) Relative Humidity: 30% - 85% Storage Environment: Temperature: -20°C (-4°F) to 55°C (131°F) Relative Humidity: 20% - 90% Maximum Treatment Time: 60 minutes - electrical stimulation Classification of protection against shock Class II medical device Classification of applied part Type BF

2-Pole Interferential Mode Waveform Type: Bi-phasic square Mode Selection: CC (Constant Current) or CV (Constant Voltage) Carrier Frequency (C.F.): 2.5kHz Sweep Low Beat Frequency:(Beat H.) (Beat L.) - 150 Hz Sweep High Bet Frequency:(Beat L.) 1-(Beat H.) Hz Output Intensity: 0-50mA (CC, at 1k ohm load) 0-50V (CV, at 1k ohm load) Treatment Time: 1-60 minutes Cycle Time (Cycle): Continuous, 5/5, 4/12, 10/10, 10/20, 10/30, 10/50 Ramp Time (Ramp): 2 seconds

Ultrasonic Generator Mode Frequency (Freq): 1MHz ± 10% 3MHz ± 10% Duty Factor (Duty): 10% - 100% , Stepping 10% Pulse Repetition Rate: 100 Hz Treatment Time: Max. 30 minutes Output Power: 0.5W - 10.0W, when duty factor ≥ 80% for 5cm² 0.5W - 15.0W, when duty factor ≤ 70% for 5cm² 0.1W - 2.0W, when duty factor ≥ 80% for 1cm² 0.1W - 3.0W, when duty factor ≤ 70% for 1cm² Effective radiating area (Aer) 1. 0cm² Optional 5. 0cm² Effective Intensity (Max): 3. 0W/cm Indication Accuracy: ± 20% (for any level above 10% of maximum)

TENS and EMS Mode Wave form type: Mono- or Bi-phasic square Mode Selection: CC (Constant Current) or CV (Constant Voltage) Frequency: 1-250 Hz Frequency modulation (F.M.): 0-249 Hz Burst Rate (Burst): 0-10Hz (7 pulse) Phase Duration (P.Dur): 30-400μs Amplitude Modulation (A.M.) 0%-100% Output Intensity: 0-100mA (CC, at 1k ohm load) 0-100V (CV, at 1k ohm load) Cycle Time (Cycle): Continuous , 4/4, 4/8, 7/7, 5/5, 4/12,10/10, 10/20, 10/30, 10/50 Treatment Time: 1-60 minutes Ramp Time: 1 second

4-Pole Interferential Mode Waveform Type: Bi-phasic square Mode Selection: CC (Constant Current) or CV (Constant Voltage) Vector: Auto: 0%-100% Manual: 0°-90° Carrier Frequency (C.F.): 4.0kHz Sweep Low Beat Frequency: (Beat H.) (Beat L.) - 150 Hz Sweep High Bet Frequency: (Beat L.) 1-(Beat H.) Hz Output Intensity: 0-50mA (CC, at 1k ohm load) 0-50V (CV, at 1k ohm load) Treatment Time: 1-60 minutes

Russian Mode Waveform Type: Bi-phasic square Mode Selection: CC (Constant Current) or CV (Constant Voltage) Carrier Frequency (C.F.): 2.5kHz Burst Frequency (Freq.) 20-100 Hz Output Intensity: 0-50mA (CC, at 1k ohm load) 0-50V (CV, at 1k ohm load) Duty Cycle: 10%, 20%, 30%, 40%, and 50% Treatment Time: 1-60 minutes Ramp Time (Ramp): 1s, 2s, and 5s