HIGHLIGHTS:

• 5 Modes: Burst, Constant, Mod 1 (pw), Mod 2 (pr), Strength Duration (SD)
• Built In Timer - 15, 30, 60 Minutes or Continue
• Easy to use Knobs and Gorgeous Display
• Light and Portable
• 105 mA Strong Intensity
• Pulse Width and Pulse Frequency adjustable
• 9 Volt Battery
• Contents: Manual, Device, 4 Reusable Electrodes, Lead wires, Battery (AC Adapter OPTIONAL)

YOU asked for it and WE DELIVERED. Our NEW LG-DELUXE offers you five modes of TENS Unit Programs. The LG-DELUXE is simple and easy to use. It is also OUR MOST EFFECTIVE TENS Unit has an "industry high" 105 mA, meaning it is very powerful. YOU CONTROL the INTENSITY, PULSE WIDTH, and PULSE RATE.

The LG-DELUXE is a battery operated TENS device that sends electrical impulses through the electrodes to the body and reaches the nerves which relieves pain. The LG-DELUXE is provided with 2 CONTROLLABLE OUTPUT CHANNEL, each INDEPENDENT of each other. A pair of electrodes can be connected to one output channel.

The electronics of the LG-DELUXE creates electrical impulses whose INTENSITY, DURATION, NUMBER PER SECOND and MODULATION may be altered with the controls/switches. These buttons are very easy to use and the LED Display showing the exact mode, time, and intensity. Values of parameters are conveniently adjusted for patients.

Technical Information:

	Mechanism	Technical description
01	Channel	Dual,isolated between channels
02	Power Supply	One 9 Volt Battery
03	Pulse Amplitude	Adjustable,0-80 rnA at 500 ohm load each channel
04	Pulse Rate	Adjustable, from 2 to 150 Hz Burst rate:0.5Hz {Burst mode)
05	Pulse Width	Adjustable, from 30 to 260 microseconds
06	Voltage	0 to 40 V (Load : 500 ohm)
07	WaveForm	Mono-phase square pulse wave
08	Size	11.7cm(L) x 6.6cm(W) x 28.5cm(H)
09	Weight	94 g (without battery)
10	Timer	15,30,60 minutes or Continue
11	Burst (B)	Bursts occur twice very second. Pulse width(adjustable),pulse rate= 100Hz,Burst rate=0.5Hz
12	NormalMode (N)	The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.
13	Modulation 1 mode (M1)	Modulation 1 mode is a pulse width modulation. The pulse width is automatically varied in a cycle pattern over an interval of nominally 10 Seconds. Pulse width increase over a period of 5 seconds from 30 µs to the control setting value, then decreases over a 5 seconds period to its original value (30 µs). The cycle is then repeated.
14	Modulation 2 mode (M2)	Modulation 2 mode is a pulse rate modulation. The pulse rate is automatically varied in a cycle pattern over an interval of nominally 10 Seconds. Pulse rate decreases over a period of 5 seconds from the control setting value to a value which is 40% less, then increase over a 5 seconds period to its original value. The cycle is then repeated.
15	SD mode (SD)	The SD (Strength-Duration) mode consists of automatic modulation intensity and pulse width in 70% range. The intensity is always increasing while the pulse width is decreasing and vice versa. The intensity is decreased by 70% while the pulse width is increased by 70% in 5 seconds. In the next 5 seconds, the intensity is increased by 70% while the pulse width is decreased by 70%. Total cycle time is 10 seconds. Pulse rate (2~150Hz) and pulse width (30 ~ 260 µs) are fully adjustable.

The waveforms of the stimulation programs:

 

Burst (B)

Normal (N)

Pulse Width Modulation

Pulse Rate Modulation

SD (Strength-Duration)

Program

Mode	Program	Modulation Method	Frequency	Pulse Width	Treatment time
TENS	B	Burst	100Hz Burst: 0.5Hz	30-260µs	15,30,60min,continuous
	N	Continuous	2-150Hz	30-260µs	15,30,60mln,continuous
	M1	Pulse width modulation	2-150Hz	30-260µs	15,30,60mln,continuous
	M2	Pulse rate modulation	2-150Hz	30-260µs	15,30,60min,continuous
	SD	Strength-Duration	2-150Hz	30-260µs	15,30,60min,continuous