A Satisfaction Guarantee and a Low Price Guarantee

ORDER NOW – SAVE MORE!
Type in Coupon Code – LUCKY7 – at Checkout and Receive an
EXTRA 7 DOLLARS OFF Your Order and FREE SHIPPING on Orders Over $100
(Expires 5/20/12)

Order Online 24/7 or Call (888) 633-7360.

Don’t be fooled by competitors. All Units are NOT Created Equal.
Genuine “LG” Products are ONLY Available Directly through LGMedSupply!

The Sonicator 715 is a lightweight, portable ultrasound that features a 5 cm2/1 MHz applicator. It is ideal for practices that specialize in treating narrow or angular anatomy such as hands or feet. The Sonicator 715 is backed by a two-year limited warranty and a one-year warranty on the applicator and cable.

Weight: 5.1 pounds (2.3 kg.)

Dimensions: 4.3 in (H) x 6 in (D) x 13.4 in (L), (11cm (H) x l5cm (D) x 34cm (L))

Sonicator® 715 Specifications:

1.1 General Specifications:

• Input: 115 VAC (±10%), 50/60 Hz, 0.6 amperes maximum
• Certification: The Sonicator 715 complies with the ultrasound performance standards set forth in the Code of Federal Regulations, Title 21 (Food and Drugs), Part 1050.10.
• UL and C–UL Listed: Model ME 715 (E55876)
• U.S. Patent Numbers: 4,966,131 and 5,095,890
• Treatment timer Indicator: The digital timer indicates time set in minutes and seconds prior to the start of treatment and treatment time remaining during treatment or when treatment is temporarily suspended.
• Accuracy: ±0.5 minute for times less than 5 minutes ±10% for times from 5 to 10 minutes ±1.0 minute for times greater than 10 minutes
• Maximum treatment time: 29 minutes
• Size: 4.3 in (H) x 6 in (D) x 13.4 in (L)
• Weight: 5.1 pounds
• Operating Temperature: +50°F to +131°F
• Humidity: Operating, 30% to 75% Relative Humidity at 104°F
• Nonoperating, up to 90% Relative Humidity at 149°F
• Storage Temperature: -40°F to 167°F

1.2 Ultrasonic Generator Specifications:

• Frequency: 1.0 MHz ±5%
• Modes: Continuous, Pulsed ±20% Duty cycle, Pulse repetition rate: 100 Hz ±20% (Pulse Mode)Pulse duration: 2 msec ±20%
• Temporal peak/average intensity ratio: 5:1 ±20%
• Maximum output power: 11 Watts
• Maximum intensity: 2.2 W/cm²
• Indication accuracy: ±20% (for any level above 10% of maximum)
• Output description: The output waveform is continuous or pulsed as programmed by the membrane panel control. In the pulse mode the 1.0 MHz is square wave pulse modulated. The power level is adjusted by varying the pulse amplitude.

Ultrasonic Applicator Specifications:

• Piezoelectric discs: The output transducer utilizes abarium titanate disc with a specially coated face.
• Frequency: 1.0 MHz ±5%
• Effective radiating area: 5 cm² ±20%
• Beam type: Collimating
• Maximum beam non–uniformity ratio: 6:1
• Spatial Pattern: The applicator produces a collimated (cylindrical) beam with an area of 5 cm², measured 5 mm from the ceramic disc surface when the radiation is emitted into the equivalent of an infinite medium of distilled, degassed water at 30° C, and with line voltage variations in the range of ±10% of the rated value. The beam of the applicator is circular in all planes parallel to the applicator face. A few inches from the face, it is a single smooth bell–shaped curve. Nearer the face the pattern varies more due to phase cancellations.