Technical Specifications
Click here To Download the Specification File |
GENERAL SPECIFICATIONS |
Adapter Supply Voltage: |
100-240 VAC, 50-60Hz, 0.5A |
Adapter Output: |
15V — 1A Max. |
Adapter Dimensions: |
110mm (L) x 185mm (W) x 33mm (H) |
Dimensions: |
250mm (L) x 185mm (W) x 82 mm (H) |
Operating Environment: |
Temperature: 10⁰C (50⁰F) to 40⁰C (104⁰F)
Relative Humidity: 30% - 85% |
Storage Environment: |
Temperature: -20⁰C (-4⁰F) to 55⁰C (131⁰F)
Relative Humidity: 20% - 90% |
Maximum Treatment Time: |
60 minutes |
|
TENS and EMS Mode |
Waveform Type: |
Mono- or Bi-phasic square |
Mode Selection: |
CC (Constant Current) or
CV (Constant Voltage) |
Frequency: |
1-250 Hz |
Frequency modulation (F.M.): |
0-249 Hz |
Burst Rate (Burst): |
0-10Hz (7 pulse) |
Phase Duration(P.Dur): |
30-400μs |
Amplitude Modulation (A.M.) |
0%-100% |
Output Intensity: |
0-100mA (CC, at 1k ohm load)
0-100V (CV, at 1k ohm load) |
Cycle Time (Cycle): |
Continuous , 4/4, 4/8, 7/7, 5/5, 4/12,10/10, 10/20, 10/30, 10/50 |
Treatment Time: |
1-60 minutes |
Ramp Time: |
1 second |
|
4-Pole Interferential Mode |
Waveform Type: |
Bi-phasic square |
Mode Selection: |
CC (Constant Current) or
CV (Constant Voltage) |
Vector: |
Auto: 0%-100%
Manual: 0⁰-90⁰ |
Carrier Frequency(C.F.): |
4.0kHz |
Sweep Low Beat Frequency:
(Beat H.) |
(Beat L.) - 150 Hz |
Sweep High Bet Frequency:
(Beat L.) |
1-(Beat H.) Hz |
Output Intensity: |
0-50mA (CC, at 1k ohm load)
0-50V (CV, at 1k ohm load) |
Treatment Time: |
1-60 minutes |
|
2-Pole Interferential Mode |
Waveform Type: |
Bi-phasic square |
Mode Selection: |
CC (Constant Current) or
CV (Constant Voltage) |
Carrier Frequency(C.F.): |
2.5kHz/td>
|
Sweep Low Beat Frequency:
(Beat H.) |
(Beat L.) - 150 Hz |
Sweep High Bet Frequency:
(Beat L.) |
1-(Beat H.) Hz |
Output Intensity: |
0-50mA (CC, at 1k ohm load)
0-50V (CV, at 1k ohm load) |
Treatment Time: |
1-60 minutes |
Cycle Time (Cycle): |
Continuous, 5/5, 4/12, 10/10, 10/20, 10/30, 10/50 |
Ramp Time (Ramp): |
2 seconds |
|
Russian Mode |
Waveform Type: |
Bi-phasic square |
Mode Selection: |
CC (Constant Current) or
CV (Constant Voltage) |
Carrier Frequency(C.F.): |
2.5kHz |
Burst Frequency(Freq.) |
20-100 Hz |
Output Intensity: |
0-50mA (CC, at 1k ohm load)
0-50V (CV, at 1k ohm load) |
Duty Cycle: |
10%, 20%, 30%, 40%, and 50% |
Treatment Time: |
1-60 minutes |
Ramp Time (Ramp): |
1s, 2s, and 5s |
|